Wheaton Air Conditioning Company Tips: How to Avoid Hot/Cold Spots in Your Home with Air Balancing

Wheaton Air Conditioning Company Tips: How to Avoid Hot/Cold Spots in Your Home with Air Balancing

warm-spots-home-wheaton

Air balancing is a process which ensures that your heating and air conditioning system circulates air optimally, that it is energy efficient, and that its overall performance is enhanced. This process is best handled by a qualified heating and air conditioning contractor in Wheaton. However, homeowners can take matters into their own hands and gain some of the benefits of air balancing through DIY applications. In this article, we’re going to cover some tips on how to balance the air in your Wheaton home in order to avoid hot/cold spots.

Tinkering with the Registers

One of the easiest and most effective ways to control the air flow into your home is by using a damper blade. This will restrict the air flow in a room that sees too much action. A best practice here is to open the registers on the upper floor and close them slightly on the lower ones during warm weather, then reverse the process during colder temperatures. However, be careful not to close the registers off completely, as that could damage the HVAC system.

Here’s a quick overview of the process:

  • Start by setting the temperature on the thermostat at around 77°F
  • Leave it on this setting overnight for up to 24 hours
  • Check the home for areas that are too cold, and adjust the registers to restrict air flow
  • Make small adjustments at first in order to find what you’re comfortable with
  • Check every 24 hours or so to see if the adjustments result in a comfortable temperature
  • Repeat the process until you reach the ideal temperature in the home

Use a 2°F Offset

A much faster solution would be to set your thermostat to have a 2°F temperature offset between floors. This helps achieve the same temperature throughout the home, if you’re experiencing uneven temperatures on different stories. As an example, you can set the upstairs at about 74°F, and your downstairs at 72°F.

Always Use Clean Air Filters

Clean air filters can provide a number of benefits:

  • You will have improved air quality
  • Your furnace will be more efficient. If the air flow is cut off by dirty filters, the heat exchange will overheat faster, which will cause the system to shut off sooner than it normally would.
  • Your HVAC system will last longer. Believe it or not, dirty filters are one of the most common causes of HVAC breakdowns. This is because of the overheating phenomenon mentioned above.
  • Your home’s energy costs will be lower. Heating makes up about 42% of the utility bill in most homes. This means that you can save a decent amount of money by making sure that your Wheaton HVAC system is running as efficiently as possible. By changing the air filters regularly, you can lower your energy costs by up to 15%!

Make Sure Your Home is Not Heating Up Due to Your Windows

The HVAC system is not always responsible for cold/hot spots in your home. For example, if your windows are not insulated properly, or if they do not have drapes, shades, blinds, or coatings, they may contribute to temperature differences in a room. For most homes, windows are completely sealed, so air flow between the outside and inside of the house is not an issue. However, if you do not have any window coverings, the sun will heat up your home during the summer. In fact, 76% of the sunlight that enters the home through a standard window will become heat. This can change the temperature in a room, and it can also add to your energy costs.

Routine and Emergency Wheaton Heating and Air Conditioning Company

If you are looking for a trusted Wheaton heating and air conditioning company to help you correct the temperature variations throughout your home, Elite Air can help. We provide routine and emergency heating and air conditioning company services.

Contact us today to schedule an appointment with one of our experts!

Tags:
No Comments

Post A Comment