24 Sep Follow These Steps Before Turning on Your AC; Tips from a Warrenville Air Conditioning Company
The AC unit does not run for 12 months a year. If you are a resident of Warrenville, Illinois, it can run anywhere from 4 to 6 months, seeing almost no activity during the colder seasons. This means that when summer rolls around, your AC unit will have had a fair bit of downtime, and that turning it on might require some extra steps. Before turning on your air conditioner for the season, here are the following steps you should take:
Checking the Indoor Equipment
Start by setting your thermostat’s “Off” position to a higher temperature (somewhere around 80 degrees), and then start checking the following components:
- The thermostat – Your thermostat may get the job done, but you can actually save a considerable amount of money by upgrading to a smart or programmable option. These options will change the way your AC unit cools the home in order to make it much more efficient.
- The ductwork – Check your ducts for any wear and tear. Leaky ductwork can put a strain on your unit and increase your energy bill.
- The vents – Make sure that none of the vents in the home are blocked, as this could put more strain on your system and create hot areas in certain rooms.
- The drain line – This is a particularly important component because it can cause a lot of damage if it becomes clogged. The drain line can be kept clear by flushing it with a cup of chlorine bleach, followed by a rinse with a gallon of water. This will keep the drain clear throughout the summer. However, if you do not clear the drain line, it can become clogged, and the water generated by the unit will be released in the area surrounding the AC unit. Believe it or not, this can actually lead to structural damage around the home. It is highly recommended that you or a professional clear your drain line at least once a year.
- The air filter – If you have not changed your air filter in a while, now would be a good time. Air filters should be changed every 1 to 2 months.
- The circuits – Make sure that all the electrical components are connected.
Checking the Outdoor Equipment
Here are the outdoor components that will need a check-up before the summer:
- The condenser unit – Make sure that the condenser unit is not blocked in any way. Remove any leaves, debris, weeds, or vines that can affect the air flow and the performance of the unit.
- The refrigerant lines – The refrigerant lines should be insulated in order to ensure that the system is running optimally. If it turns out that the lines need repairs, it is best to contact a professional.
- The outdoor electrical wiring – Check for any wear and tear here. It’s best to notice any problems before summer is in full swing so that you can call in a professional to repair them right away.
Turning On the AC
If everything looks good so far, you’re pretty much in the clear. Now, you can lower the temperature threshold on your thermostat to the appropriate level and go outside to listen for any irregular sounds in the condenser fan. The air coming out of the unit will most likely feel warm at first, which is perfectly normal. After about 10-15 minutes, the temperature in the home should start to cool off.
Contact the Most Trusted Air Conditioning Company in the Warrenville Area
However, if you encounter any issues with any of the previous steps, contact us directly. We have been providing air conditioning repairs, air conditioning service and air conditioning installations in the Warrenville area for years, and we would be more than happy to serve you.